4* 8 anti-lightning resistance fuse-2T
1.規格型號和安規認證
MODEL NUMBER AND SAFETY CERTIFICATION
Model Number: Part Number+Rated Current+Rated Voltage+Approvals.
例子[example]:
2F/2T 1.25A 250V 1)系列號 Part Number
2)額定電流 Rated Current
1) 2) 3) 3)額定電壓 Rated Voltage
1-2 額定電流和額定電壓
Rated Current And Voltage
額定電流: 32mA~15A
Rated Current: 32 mA~15A
額定電壓;125V/250V/400V AC
Rated Voltage:125V/250V/400 AC
1-3標示Marking
保險絲上需有下列標示
The fuse shall have the following marking:
規格:特性符號+額定電流+額定電壓
Specification:Characteristic Symbol+Rated Voltage
32mA~800mA : _mA 1A~15A:_A
Trade mark:The Manufacture’s Logo+Part Number+Approvals
32mA~15A:
注意:對標示字樣大小沒有規定
Note:Size of the markings have not be specified.
2.適用範圍
SCOPE
適用於一般電子設備。Used in electronic equipment.
3.工程圖和結構
OUTLINE DRAWING AND STRUCTURE
3-1 工程圖(單位:mm)
Outline Drawing and Dimensions(Unit:mm)
3-2結構
Structure
編號
No.
|
元件
Component
|
材質
Material
|
數量
Quantity
|
(1)
|
熔絲
Wire
|
合金
Alloy
|
1
|
(2)
|
銅帽
Cap
|
黃銅鍍鎳
Brass with mickel plated
|
2
|
(3)
|
本體
Body
|
陶瓷管/胶料
Ceramic Tube/Plastic
|
1
|
(4)
|
引線
Lead
|
鍍錫銅線
Tinned Copper wire
|
2
|
(5)
|
镀层
Insulating Coat
|
环氧树脂
Epoxy Resin
|
/
|
4.外觀及形狀
APPEARANCES AND CONFIGURATION
4-1外觀:外观不应有显著的污点、铁锈或者裂纹
Appearances:There shall not be any remaekable stain,rust or crack on the appearances.
4-2形狀:轴向引脚的超小型保险丝
Configuration:Axial Leaded Micro-Fuse.
5.物理特性
PHYSICAL CHARACTERISTIC
5-1 拉力測試
Tensile test
沿端子的軸向施加10N的拉力,持續1分鐘。
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.
6.電氣特性
ELECTRICAL CHARACTERISTICS
% of Ampere Rating
|
Ampere Rating
|
Opening Time
|
100%
|
32mA - 15A
|
4 Hours, Min.
|
200%
|
32mA - 15A
|
60 Second, Max
|
275%
|
500mA~ 10A
|
300 msecs., Max.
|
400%
|
500mA~ 10A
|
30 msecs., Max.
|
1000%
|
500mA~ 10A
|
4 msecs., Max.
|
规格判定Item
|
Openrating Temp
|
-55℃~125℃
|
最大熔断时限
|
200% Rating 60SEC
|
突波实验
|
3millisecond at 1000% rated current
|
Melting I 2 t
|
1.83~2.083
|
Cold Ohms
|
1.25A/0.058~0.067 Ohm
|
Interrupting rating
|
50A/125VAC
50A/250VAC
|
Dimensions
|
9mm*¢3.9mm
|
Ssfty
|
UL CSA CCC ROHS
|
7.環境特性
ENVIRONMENTAL SPECIFICATION
7-1 操作溫度範圍:-55℃~125℃
Operating Temperature: -55℃~125℃
7-2 保存條件
Storage Conditions
溫度:+10℃~60℃
Temperature: +10℃~60℃
在相對濕度≤75%下平均可存放3年
On average, It can be stored below the relative humidity or 75% for 3 years.
在非露天下,相對濕度為95%下最多可存放30天。
Without dew, It can be kept under humidity of 95% for 30 days.
8.焊接條件
SOLDERING PAAMETERS
8-1波峰焊
Wave Solder
焊接溫度:260±5℃
Soldering Temperature:260±5℃
焊接時間:4 Sec. Max.
Soldering Time:4 Sec.Max.
8-2手工焊錫
Manual Solder
焊接溫度:350±5℃
Soldering Temperature: 350±5℃
焊接時間:3 Sec. Max.
Soldering Time: 3 Sec. Max.
9.其他使用注意事項
OTHER NOTICE IN USING
如果需在保險絲上加熱縮套管,烘烤溫度與時間需參照以下規定
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
設定烘烤溫度:不大於150℃ 烘烤時間:50s Max.
The temperature should be sel under 150℃,roast time:50s Max.
Dongguan Fukuanyuan Electronic Co., Ltd. (Dongguan Fuyuan Electronic Technology Co., Ltd.) was established in 1998, mainly engaged in the production and sales of safety components, through 10 years of reform and efforts now has become a set of production and sales of safety components as one of the assembly; Fukuanyuan will continue to adhere to the principle of quality first, customer service, and continue to provide our customers with high-quality and inexpensive products. Our company currently mainly provides the following products:
CurrentFuse -CurrentFuse
Glass tube current fuse
Ceramic tube current fuse
Patch current fuse
Resistance type fuse
Mini current fuse
High voltage current fuse
DC current fuse
AC current fuse
SMD- SMD type self - recovery fuse
AI- Plug-in self - recovery fuse
Fuseholder -Fuseholder
ESTMF series fuse holder
EDKFH series fuse holder
SKPTF series fuse holder
Auto -- Fuse holder for a car
OPWOP series fuse holder
Cable box type fuse holder
Fuse Clip & AMP; terminal
Insurance header
The insurance holder
Large current | high insurance
Temperature fuses -Thermalcutoffs
Square temperature fuse
Resistance type temperature fuse
High current temperature fuse
Ceramic temperature fuse
Iron case temperature fuse
SW.C temperature fuse
NEC temperature fuse
Emerson temperature fuse
Internal bridge temperature fuse
Panasonic temperature fuse
AUPO temperature fuse
Temperature switch/thermostat -Thermalprotector
Thermal protector/recoverable thermostat
Air cylinder temperature control switch/temperature controller
Motor thermal protector/thermostat
Defrost and dehumidify thermostat/temperature control switch
Ultra-low temperature control switch/thermostat
Micro temperature control switch/thermostat
Temperature switch/thermostat -Thermalprotector
7 am/am 17 thermostat
KSD301 series temperature switches
KSD-01F pin temperature switch
9700 series square shape temperature control switch
BR series temperature control switch
SEKIST - 22 thermostat
Varistors -Varistors
varistor
Zinc oxide varistor
Patch varistor
SMD varistor
Plug-in type varistor
High energy varistor
Autofuse/carfuse
FY-MIN fuse for small car insert
Medium car insert fuse FY-ATC
FY-MAX plug fuse for large size car
Small fork plug auto fuse FY-UF
FY-MF fork-bolt type fuse for large size automobile
Tubular | columnar auto fuse
Fuses for other car models
Overload protector -CIRCUITBREAKER
AR1/AR2 series overload protector
W series overload protector
88/88A series overload protector
90 series overload protector
91/91L series overload protectors
97/98/98H series overload protector
Overload protector with switch series
Thermistor -NTC/PTCThermistor
Negative temperature coefficient thermistor
Ceramic positive temperature coefficient thermistor
Polymer positive temperature coefficient thermistor
Temperature sensor
Humidity sensor
The company will continue through the effective implementation of ISO9000 quality management system, so that the various operation links involved in the production and management of enterprises, are rigorous and orderly, and continue to produce high-quality and cheap, marketable products to participate in market competition, so that enterprises to maintain a strong long-term profitability. At the same time, we will attach great importance to the long-term cooperation with well-known enterprises in the industry, and strive for the maximum power of agency to sell products to customers at the most favorable price.